Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek ASR-2100R - 1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount -- COPY

1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount -- COPY

GW Instek

Rated 0 / 5 (0 reviews)

Category : AC/DC Power Source

by quote only Add to Cart

Documents:

Overview
Features
Specifications
Calibration

The ASR-2000 series, an AC+DC power source aiming for system integration or desktop applications, provides both rated power output for AC output and rated power output for DC output. Nine ASR-2000 output modes are available, including 1) AC power output mode (AC-INT Mode), 2) DC power output mode (DC-INT Mode), 3) AC/DC power output mode (AC+DC-INT Mode), 4) External AC signal source mode (AC-EXT Mode), 5) External AC/DC signal source mode (AC+DC-EXT Mode), 6) External AC signal superposition mode (AC-ADD Mode), 7) External AC/DC signal superposition mode (AC+DC-ADD Mode), 8) External AC signal synchronization mode (AC- SYNC Mode), 9) External AC/DC signal synchronization mode (AC+DC-SYNC Mode).

The ASR-2000 series provides users with waveform output capabilities to meet the test requirements of different electronic component development, automotive electrical devices and home appliance, including 1) Sequence mode generates waveform fallings, surges, sags, changes and other abnormal power line conditions; 2) Arbitrary waveform function allows users to store/upload user-defined waveforms; and 3) Simulate mode simulates power outage, voltage rise, voltage fall, and frequency variations. When the ASR-2000 series power source outputs, it can also measure Vrms, Vavg, Vpeak, Irms, Iavg, Ipeak, IpkH, P, S, Q, PF, CF, 40th-order Voltage Harmonic and Current Harmonic. In addition, the Remote sense function ensures accurate voltage output. The Customized Phase Angle for Output On/Off function can set the starting angle and ending angle of the voltage output according to the test requirements. V-Limit, Ipeak- Limit, F-Limit, OVP, OCP, OPP function settings can protect the DUT during the measurement process. In addition to OTP, OCP, and OPP protection, the ASR-2000 series also incorporates the Fan fail alarm function and AC fail alarm function.

The front panel of the ASR-2050/2100 provides a universal socket or a European socket, which allows users to plug and use so as to save wiring time. The ASR-2050R/2100R is 3U height and 1/2 Rack width design, which is compatible with ATS assembly. The ASR-2000 series supports I/O interface and is equipped with USB, LAN, External I/O and optional RS-232C and GPIB.

 

Panel Introduction

 

Operating Area for ASR-2000 Series


AC Output for
ASR-2050/ASR-2050R

DC Output for
ASR-2050/ASR-2050R

AC Output for
ASR-2100/ASR-2100R

DC Output for
ASR-2100/ASR-2100R

The ASR-2000 series is an AC+DC power source that provides rated power output not only at the AC output, but also at the DC output. The operation areas are shown in diagrams.

Model Name Power Rating Max. Output Current Max. Output Voltage
ASR-2050 500 VA 5 / 2.5 A 350Vrms / 500Vdc
ASR-2100 1000 VA 10 / 5 A 350Vrms / 500Vdc
ASR-2050R 500 VA 5 / 2.5 A 350Vrms / 500Vdc
ASR-2100R 1000 VA 10 / 5 A 350Vrms / 500Vdc

 

Measurement Items for ASR-2000 Series

RMS Meas Display

RMS Meas Display

AVG Meas Display

AVG Meas Display

Peak Meas Display

Peak Meas Display

Voltage Harmonic

Voltage Harmonic

Current Harmonic

Current Harmonic

The ASR-2000 series provides users with measurement capabilities including Vrms, Vavg, Vpeak, Irms, Iavg, Ipeak, IpkH, P, S, Q, PF, CF, 40th-order Voltage Harmonic and Current Harmonic. During the power output, the measurement parameters including Vrms/Irms, Vavg/Iavg and Vmax/Vmin/ Imax/Imin can be switched by users at any time to display the instantaneous calculation reading.

 

Sequence Mode and Appplications

 

Momentary Drop in Supply Voltage

Momentary Drop in Supply Voltage

Reset behavior at Voltage Drop

Reset behavior at Voltage Drop

Starting Profile Waveform

Starting Profile Waveform

Instantaneous Power Failure

Instantaneous Power Failure

Simulate Mode

Power Outage

Power Outage

Voltage Rise

Voltage Rise

Voltage Fall

Voltage Fall

 

T, IPK Hold & IPK, Hold Functions

T, IPK Hold & IPK, Hold Functions

T, Ipk Hold is used to set the delay time after the output (1ms ~ 60,000ms) to capture the Ipeak value and keep the maximum value. The update only functions when the measurement value is greater than the original value. The T, Ipk Hold delay time setting can be used to measure surge current at the power on process of the DUT.

Ipk Hold can be used to measure the transient surge current of the DUT at power on without using an oscilloscope and a current probe.

 

Slew Rate Mode

Time Mode

Time Mode

Slope Mode

Slope Mode

The ASR-2000 series can set the Slew Rate Mode to determine the rise time of the voltage according to the test requirements of the DUT. Slew Rate Mode provides "Time" and "Slope" modes. When setting "Time" mode, ASR-2000 can increase output to 10~90% of the set voltage within 100μs; and when selecting "Slope" mode, ASR-2000 increases output voltage by a fixed rising slope of 1.5V/μs until reaching the set voltage value.

In addition, if users decide to self-define the rise time of the output voltage, users can flexibly set the rise time of the ASR-2000 series voltage by editing the Sequence mode.

 

Remote Sense Function

For high current output applications, the voltage drop caused by large current passing through the load cables will affect the measurement results. The ASR-2000 series provides the remote sense function that can sense the voltage drop of the DUT to the ASR-2000 series and the DUT will be compensated by the ASR-2000 series. The maximum voltage that the remote sense function can compensate is 5% of the output voltage.

GW Instek ASR-2100R - 1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount -- COPY
  • Output Rating: AC 0 – 350 Vrms, DC 0 - ± 500 V
  • Output Frequency up to 999.9 Hz
  • DC Output (100% of Rated Power)
  • Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
  • Voltage and Current Harmonic Analysis(THDv, THDi)
  • Remote Sensing Capability
  • OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
  • Support Arbitrary Waveform Function
  • Output Capacity: 500VA/ 1000VA
  • Customized Phase Angle for Output On/Off
  • Sequence and Simulation Function(up to 10 sets)
  • Interface: USB, LAN(std.); RS-232+GPIB(opt.)
  • Built-in External Control I/O and External Signal Input
  • Built-in Output Relay Control
  • Memory Function (up to 10 sets)
  • Built-in Web Server

Do you have a 1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount -- COPY that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount -- COPY calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review the GW Instek ASR-2100R - 1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount -- COPY

1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount -- COPY

Name :

Email :

Title :

Review:

×
This is the header
This is a test message.