GW Instek MSO-2204EA - 200MHz, 4-channel, Digital Storage Oscilloscope, 16-channel LA, dual channel 25MHz AFG
Economical and Multi-Functional MSO
The MSO-2000 series is a mixed-signal oscilloscope, which offers dual analog channels + 16 digital channels or 4 analog channels + 16 digital channels. The MSO-2000 series includes MSO-2000E and MSO-2000EA. MSO-2000E has a built-in 16-channel logic analyzer and MSO-2000EA has a built-in 16-channel logic analyzer and a dual channel 25MHz arbitrary waveform generator. The entire series features bandwidth selections of 200MHz, 100MH, and 70MHz. Dual analog channel models provide 1GSa/s real-time sampling rate per channel; four analog channel models provide 1GSa/s maximum real-time sampling rate. The 8-inch 800*480 TFT LCD and the minimum 1mV/div vertical range allow the MSO-2000 series to measure complex feeble signals and clearly display measurement results.
For analog channels, the MSO-2000 series provides 10M long memory for users to completely retrieve and analyze waveforms. Users, based upon the application requirements, can select 1k, 10k, 100k, 1M or 10M memory depth. Short memory depth collocating with the high sampling rate allows users to observe fast-changing waveforms and, on the other hand, long memory depth aims for continuously changing waveforms. The MSO-2000 series is equipped with waveform search and segmented memory functions to expand the flexible applications of 10M long memory. The segmented memory can be divided the maximum into 29,000 sections for users to bypass any unimportant waveforms so as to swiftly search all required waveforms. With the segmented memory function, more meaningful waveforms can be saved and target waveforms can be displayed rapidly. Users, by using the waveform search function, can rapidly search desired waveforms according to the required trigger conditions.
CAN Bus Trigger and Decode
16-channel logic analyzer has a memory depth of 10Mpts per channel, which can retrieve more and longer digital signals as well as clearly display digital signals to obtain sufficient information for analysis. The minimum input swing of logic analyzer represents the minimum operating voltage of ±250 mV, which demonstrates that digital channels are highly sensitive with respect to input. The standard bus trigger and decoding functions include serial and parallel bus such as I2C, SPI, UART (RS232/422/485) and CAN/LIN bus for automotive communications. The parallel bus function is only for digital channels. Bus waveforms can be triggered and decoded in real time. The MSO-2000 series offers complete analysis and debugging capabilities with the economical pricing.
Dual Channel Arbitrary Waveform Generator
In addition to a 16-channel logic analyzer, MSO-2000EA has a built-in dual channel 25MHz arbitrary waveform generator with the modulation capability and also features 14 bits vertical resolution; sample rate of 200MSa/s; 5 standard output waveforms (Sine, Square, Pulse, Ramp, DC, Noise) and 7 user-defined waveforms (Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac); AM/FM/FSK modulation and sweep function. The user friendly interface is the ideal choice for applications such as circuit simulation and education tests.
- 200/100/70MHz bandwidth selections: 2 or 4 channels
- MSO-2000E equips with a 16-channel logic analyzer
- MSO-2000EA equips with a 16-channel logic analyzer and a dual channel 25MHz arbitrary waveform generator
- Real time sample rate for each channel is 1GSa/s (2-channel models);Maximum real time sample rate is 1 GSa/s (4- channel models)
- Maximum 10M memory depth and VPO waveform display technology
- Waveform update rate up to 120,000 wfms/s
- 8 ” WVGA TFT LCD screen display
- Maximum 1M FFT provides higher frequency domain resolution measurements
- High Pass, Low Pass and Band Pass Filter Functions
- 29,000 segmented memory sections and waveform search function
- I2C/SPI/UART/CAN/LIN serial bus trigger and decoding functions
- Data log function is able to track signal changes up to 100 hours
- Network storage function
Channels | 4 |
Bandwidth | DC~200MHz (-3dB) |
Rise time | 1.75ns |
Bandwidth Limit | 20M/100MHz |
Vertical Sensitivity
Resolution | 8 bit :1mV~10V/div |
Input Coupling | AC, DC, GND |
Input Impedance | 1MΩ// 16pF approx. |
DC Gain Accuracy | ±(3%)when 2mV/div or greater is selected ±(5%)when 1mV/div is selected; |
Polarity | Normal & Invert |
Maximum Input Voltage | 300Vrms, CAT I |
Offset Position Range | 1mV/div ~ 20mV/div : ±0.5V 50mV/div ~ 200mV/div : ±5V 500mV/div ~ 2V/div : ±25V 5V~10V/div : ±250V |
Waveform Signal Process | +, -, ×, ÷, FFT, FFTrms ,User Defined Expression. |
FFT:1Mpts
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.
Trigger
Source | CH1 ,CH2, CH3, CH4, Line, EXT* *dual channel models only |
Trigger Mode | Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence |
Trigger Type | Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus |
Holdoff range | 4ns~10s |
Coupling | AC,DC,LF rej. ,HF rej. ,Noise rej. |
Sensitivity | 1 div |
External Trigger
Range | ±15V |
Sensitivity | DC ~ 100MHz Approx. 100mV 100MHz ~ 200MHz Approx. 150mV |
Input Impedance | 1MΩ±3%~16pF |
Horizontal
Time base Range | 1ns/div ~ 100s/div (1-2-5 increments) ROLL: 100ms/div ~ 100s/div |
Pre-trigger | 10 div maximum |
Post-trigger | 2,000,000 div maximum. |
Time base Accuracy | ±50 ppm over any ≥ 1 ms time interval |
Real Time Sample Rate | Max.:1GSa/s (4ch model) Per channel 1GSa/s (2ch model) |
Record Length | Max:10Mpts |
Acquisition Mode | Normal, Average, Peak Detect, Single |
Peak Detection | 2ns (typical) |
Average | selectable from 2 to 256 |
X-Y Mode
X-Axis Input | Channel 1; Channel 3* *four channel models only |
Y-Axis Input | Channel 2; Channel 4* *four channel models only |
Phase Shift | ±3° at 100kHz |
Cursors and Measurement
Cursors | Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%) |
Automatic Measurement | 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase ,Cursor measurements |
Control Panel Function
Auto counter | 6 digits, range from 2Hz minimum to the rated bandwidth |
Autoset | Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset |
Save Setup | 20set |
Save Waveform | 24set |
Display
TFT LCD Type | 8" TFT LCD WVGA color display |
Display Resolution | 800 horizontal × 480 vertical pixels (WVGA) |
Interpolation | Sin(x)/x |
Waveform Display | Dots, vectors, variable persistence (16ms~4s), infinite persistence |
Waveform Update Rate | 120,000 waveforms per second, maximum |
Display Graticule | 8 x 10 divisions |
Display mode | YT ;XY |
Interface
USB Port | USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1 |
Ethernet(LAN) Port | RJ-45 connector, 10/100Mbps with HP Auto-MDIX |
Go-NoGo BNC | 5V Max/10mA TTL open collector output |
Kensington Style Lock | Rear-panel security slot connects to standard Kensington-style lock. |
Logic analyser specifications
Sample Rate | Per Channel 1GSa/s |
Bandwidth | 200MHz |
Record Length | Per Channel 10M pts (max) |
Input Channels | 16 Digital (D15 - D0) |
Trigger type | Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART(RS232/422/485), CAN, LIN), Parallel Bus |
Thresholds Quad | D0~D3, D4~D7,D8~D11 ,D12~D15 Thresholds |
Threshold selections | TTL, CMOS(5V,3.3V,2.5V), ECL, PECL,0V ,User Defined |
User-defined Threshold Range | ±5V |
Maximum Input Voltage | ±40 V |
Minimum Voltage Swing | ±250 mV |
Vertical Resolution | 1 bit |
AWG Specifications (MSO-2000EA only)
Channels | 2 |
Sample Rate | 200 Msa/s |
Vertical Resolution | 14 bits |
Max. Frequency | 25 MHz |
Standard Waveform | Sine, Square, Pulse, Ramp, DC, Noise |
Built-in ARB Waveform | Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac |
Output Range | 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω |
Output Resolution | 1mV |
Output Accuracy | 2% (1 kHz) |
Offset Range | ±2.5 V, HighZ;±1.25 V, 50 Ω |
Offset Resolution | 1mV |
Sine | |
Frequency Range | 100mHz to 25MHz |
Flatness | ±0.5 dB( relative to 1kHz) |
Harmonic Distortion | -40 dBc |
Stray (Non-harmonic) | -40 dBc |
Total Harmonic Distortion | 1% |
S/N Ratio | 40 dB |
Square/Pulse | |
Frequency Range | 100mHz to 15MHz |
Rise/Fall time | <15ns |
Overshoot | <3% |
Duty cycle | Square:50%;Pulse:0.4%~99.6% |
Min. Pulse Width | 30 ns |
Jitter | 500 ps |
Ramp | |
Frequency Range | 100mHz~1MHz |
Linearity | 1% |
Symmetry | 0 to 100% |
Miscellaneous
Multi-language menu | Available |
operation environment | Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C. |
On-line help | Available |
Time clock | Time and Date ,Provide the Date/Time for saved data |
Dimensions | 384mmX208mmX127.3mm |
Weight | 3kg |
Do you have a 200MHz, 4-channel, Digital Storage Oscilloscope, 16-channel LA, dual channel 25MHz AFG that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 200MHz, 4-channel, Digital Storage Oscilloscope, 16-channel LA, dual channel 25MHz AFG calibrated today! Click Here!
There are currently no reviews for this product.