Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

AMPROBE AMP-330 - 600 A AC/DC Clamp Meter Industrial Motor Maintenance

Category : Clamp Meter

by quote only Add to Cart

Documents:
Users Manual Datasheet

Overview
Features
Specifications
Calibration

The Modern Evolution of the Professional Clamp Meter

Amprobe's AMP-300 Series True-RMS Clamp Meters offer a complete range of measuring functions for modern industrial environments, motor testing and HVAC applications. All models feature True-RMS sensing, low pass filters and fast response processors for quick, error-free measurements. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, and a third input jack enables motor rotation and 3-phase sequence testing.

AMPROBE AMP-330 - 600 A AC/DC Clamp Meter Industrial Motor Maintenance
  • True-RMS
  • Motor Testing Capabilities:
    • Motor Rotation
    • 1 and 3-phase sequence testing
    • Inrush current monitoring during motor start-up
  • Amp-Tip Function
  • Low Pass Filter for variable frequency drives
  • Safety Rated: CAT III 600 V

AMP-300 Series Applications

  • Accurate measurement of current, voltage and frequency on all electrical systems including distorted, non-sinusoidal signals (True-RMS function) and variable frequency drives (low pass filter). 
  • Capacitance measurement for start and run motor capacitors. 
  • Resistance and continuity functions to verify quality of electrical connections and to check if motor and transformer coils are working properly.
  • 3-phase Motor and Phase Rotation Tests allow proper connection of a motor to a 3-phase system. Improperly connected motors will spin in a reverse direction, which may destroy the motor or equipment connected to it. 
  • Low Pass filter allows measurement of current and voltage on variable frequency drives (motors with speed controlled by frequency). Without this feature, the meter would provide erroneous readings when measuring voltage and current. 
  • DC Microamps output for measurement of flame sensors. Test the proper operation of the flame sensor safety system in gas appliances. A broken sensor in a gas appliance will prevent the safety valve from opening and the appliance will not work. 
  • Inrush current measurement for motor start-up monitoring, allowing users to verify that the motor is receiving the required inrush current to support proper motor start.

 

Detailed Specifications

Safety Rating CAT IV 600 V, CAT III 1000 V 
Jaw Opening 2.0 in (51 mm)
AC Voltage (True-RMS) Range: 0 to 1000 V
Accuracy: ±0.8% + 5LSD (50 to 60 Hz)
±1.5% + 5LSD (20 to 200 Hz)
±10% + 5LSD (200 to 400 Hz)
DC Voltage Range: 0 to 1000 V
Accuracy: ±0.8% + 5LSD
AC+DC Voltage Range: 0 to 1000 V
Accuracy: ±1.0% + 7LSD (50 to 60 Hz)
±1.8% + 7LSD (DC, 40 to 200 Hz)
±12% + 7LSD (200 to 400 Hz)
AC Current (True-RMS) Range: 0 to 1000 A
Accuracy: ±1.8% + 5LSD (40 to 100 Hz)
±2.2% + 5LSD (100 to 400 Hz)
DC Current Range: 0 to 1000 A
Accuracy: ±1.8% + 5LSD
AC+DC Current Range: 0 to 1000 A
Accuracy: ±2.2% + 7LSD (DC, 40 to 100 Hz)
±2.5% + 7LSD (100 to 400 Hz)
Precise Low Current AC Range: 0 to 60.00 A
Accuracy:
±1.5% + 5LSD (0.00 to 20.00 A, 40 to 100 Hz)
±2.0% + 5LSD (0.00 to 20.00 A, 100 to 400 Hz)
±3.0% + 5LSD (20.00 to 60.00 A, 40 to 100 Hz)
±3.0% + 5LSD (20.00 to 60.00 A, 100 to 400 Hz)
Precise Low Current DC Range: 0 to 60.00 A
Accuracy: ±1.5% + 5LSD (0.00 to 20.00 A)
±3.0% + 5LSD (20.00 to 60.00 A)
Precise Low Current AC+DC Range: 0 to 60.00 A
Accuracy:
±2.0% + 7LSD (0.00 to 20.00 A, DC, 40 to 100 Hz)
±2.2% + 7LSD (0.00 to 20.00 A, 100 to 400 Hz)
±3.0% + 7LSD (20.00 to 60.00 A, DC, 40 to 100 Hz)
±3.0% + 7LSD (20.00 to 60.00 A, 100 to 400 Hz)
Frequency Range: 5.00 to 999.9 Hz
Accuracy: ±1.0% + 5LSD (1000 V range)
Range: 40.0 to 400.0 Hz
Accuracy: ±1.0% + 5LSD (1000 A range)
Resistance Range: 0.0 to 60.00 kΩ
Accuracy: ±1.0% + 5LSD
Capacitance Range: 0.0 to 2500 μF
Accuracy: ±2.0% + 4LSD
Continuity Beeper ON ≤ 10 Ω
OFF > 250 Ω
Non-Contact Voltage 20 to 440 V, 50/60 Hz 20 to 440 V, 50/60 Hz
True-RMS
Low Pass Filter
Autoranging
Relative Zero
MAX/MIN/AVG
Diode Test
Data Hold
Backlight
Auto Power Off
DC Microamps Range: 0.0 to 2000 μA
Accuracy: ±1.0% + 5LSD
Temperature*
(Type K
thermocouple)
*Error does not
include Type-K
thermocouple errors
Range: -40.0 to 752°F, -40.0 to 400°C
Accuracy: -40.0 to 14.0°F (±1.0% +3.0°F), >14.0 to 99.9°F (±1.0% +1.5°F)
100 to 752°F (±1.0% +2°F), -40.0 to -10.0°C (±1.0% +1.5°C)
>-10.0 to 99.9°C (±1.0% +0.8°C), 100 to 400°C (±1.0% + 1°C)
3-Phase and
Motor Rotation
Indication
Rotation-R for mains supply
Rotation-M for motors

Inrush Current

Peak Hold (Crest)

Work Light

General Specifications

Display 3-5/6 digits 6000 counts
Polarity Automatic
Update Rate 5 per second nominal
Operating Temperature 14 to 122°F (-10 to 50°C)
Relative Humidity Non condensing at ≤10°C
90% at 10 to30°C
75% at 30 to 40°C
45% at 40 to 50°C
Operating Altitude 0 to 2000 m
Pollution Degree 2
Storage Temperature -4 to 140°F (-20°C to 60°C),< 80% RH
Temperature Coefficient Nominal 0.10 x (specified accuracy)/ °C @ (0°C to 18°C or 28°C to 50°C)
Battery Two AAA 1.5 V battery
EMC Meets EN 61326-1:2006
Safety Compliance UL/IEC/EN 61010-1 ed. 3.0, IEC/EN 61010-2-033 ed. 1.0, CAN/CSA C22.2 NO. 61010-1 ed. 3.0, IEC/EN 61010-2-032 ed. 3.0 & IEC/EN 61010-031 ed. 1.1
Certification UL (c/us) and CE
Dimensions (L x W x H): 10.16 x 3.70 x 1.73 in (258 x 94 x 44 mm)
Weight: 420 g (0.93 lb)

 


Do you have a 600 A AC/DC Clamp Meter Industrial Motor Maintenance that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 600 A AC/DC Clamp Meter Industrial Motor Maintenance calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review this product

Name :

Email :

Title :

Review:

×
This is the header
This is a test message.